Guide · Warehouse managers · 3 min read · Updated 17 November 2026
How to Plan a Warehouse Racking Layout
Short answer
Plan a warehouse racking layout by measuring the clear height and floor area, confirming pallet sizes and weights, choosing truck types to set aisle widths, then fitting bays and beam lengths to suit. Allow for sprinklers, lighting, doors, columns and safe pedestrian routes. Counterbalance trucks need the widest aisles, reach trucks less and very narrow aisle trucks the least.
Start with your stock and pallets
Know what you store. Record pallet sizes, heights and weights, and how many pallets you need to store. UK pallets are typically 1200 mm by 1000 mm, and Euro pallets 1200 mm by 800 mm. Pallet size decides beam lengths and frame depths.
Consider how stock moves. Fast-moving items need accessible locations near dispatch. Slow-moving stock can go higher or further away.
Also consider how many pick faces you need. A warehouse with hundreds of different products may need more pallet locations at ground level for picking than one with a few fast-moving lines. Counting pick faces, reserve locations and space for overflow helps decide the balance between racking, shelving and floor storage.
- Pallet sizes and heights
- Maximum pallet weights
- Number of pallet locations needed
- Fast and slow-moving stock
Aisle widths and truck types
Truck type has a large effect on aisle width and storage density. Counterbalance trucks need the widest aisles. Reach trucks work in narrower aisles. Very narrow aisle trucks work in the narrowest aisles but need guidance systems and very flat floors.
Check the truck manufacturer's recommended working aisle width for your pallet sizes, as figures vary by model.
Narrower aisles increase storage density but cost more in trucks and floor preparation. Very narrow aisle systems need floors flat to tight tolerances, which may mean grinding or a new floor. Reach trucks offer a middle ground for many warehouses. Weigh the extra storage against the cost of trucks, floor work and training before choosing.
| Truck type | Typical aisle width | Notes |
|---|---|---|
| Counterbalance forklift | Around 3.5–4 m | Versatile, widest aisles |
| Reach truck | Around 2.7–3.1 m | Higher lifts, narrower aisles |
| Very narrow aisle truck | Around 1.6–1.9 m | Needs guidance and flat floors |
Height, sprinklers and obstructions
Measure the clear height to the lowest obstruction, such as roof beams, lights or sprinkler heads. Sprinkler systems often require clearance above the top of stored goods, which limits racking height. Check with your fire safety adviser or insurer.
Map columns, doors, fire exits, electrical panels and drains. Racking must not block fire exits or access to equipment.
Lighting should sit above aisles rather than over racking, so light reaches the pick faces and is not blocked by stored goods. If new racking is taller than existing lights, the lighting may need moving. Check heating units, extraction and roof drainage too, as they often sit at low points in the roof.
A measured survey of the empty building, with obstructions marked, is the best starting point for any layout drawing.
Traffic routes and safety
The Workplace (Health, Safety and Welfare) Regulations 1992 require traffic routes to be organised so pedestrians and vehicles can move safely. Plan pedestrian walkways, crossing points and barriers. Keep loading areas clear.
Fit upright protectors and end-of-aisle barriers where forklifts operate. Use anti-collapse mesh where racking backs onto walkways.
Loading docks and marshalling areas need space for pallets being checked in and out. Racking laid out too close to dock doors creates congestion and increases damage. Allow a clear zone between docks and the first racking runs, sized to suit the number of deliveries and dispatches at peak times.
- Pedestrian walkways and crossings
- Upright protectors and end barriers
- Anti-collapse mesh near walkways
- Clear routes to fire exits
Beam lengths and bay design
Beam length depends on pallet size and how many pallets sit on each level. A 2700 mm beam commonly takes three Euro pallets on their 800 mm face, while three UK pallets on their 1000 mm face need a longer beam. Allow clearance between pallets and frames.
Beam levels are set to suit pallet heights, with clearance for lifting. Changing beam levels later affects frame capacity, so plan carefully.
Frame depth is matched to pallet depth, usually allowing a small overhang at the front and back so pallets sit securely on the beams. Back-to-back runs need a gap between frames, held with row spacers, to allow for overhang and flue space for sprinklers where required.
Allow for future flexibility. Stock profiles change, and a layout with a few spare locations or adaptable beam heights copes better than one designed exactly for today's needs. Ask the designer to show how the layout could be adjusted if pallet heights or volumes change.
Getting a layout and price
Send a floor plan, clear height, pallet details and truck types. We prepare a layout and confirm one fixed price. Pallet racking supplied and installed costs £40–£90 per pallet location.
Racking must be erected to manufacturer specifications, anchored and labelled with load notices. BS EN 15635 recommends inspection at least every twelve months by a technically competent person.
Before installation, the floor should be checked for condition and flatness, especially where tall racking or VNA trucks are planned. The installer anchors frames into sound concrete, so cracked or weak areas need repair first. A layout drawing showing frame positions, aisle widths and walkways should be agreed and kept for future inspections.
Questions people also ask
How wide should warehouse aisles be?
It depends on truck type and pallet size. Counterbalance trucks typically need around 3.5–4 m, reach trucks around 2.7–3.1 m and very narrow aisle trucks around 1.6–1.9 m. Check the truck manufacturer's figures.
How high can pallet racking go?
It depends on clear height, sprinkler clearances, truck lift height, frame design and floor strength. Measure to the lowest obstruction and check sprinkler requirements with your fire safety adviser or insurer.
What size pallets are used in the UK?
UK pallets are typically 1200 mm by 1000 mm and Euro pallets 1200 mm by 800 mm. Pallet size decides beam lengths and frame depths, so confirm sizes before planning a layout.
Written and checked by the Industrial Shelving Installation team. Read our editorial policy.
More guides
How Much Does Pallet Racking Installation Cost in the UK?
Pallet racking supplied and installed in the UK costs £40–£90 per pallet location, and installing customer-supplied racking costs £10–£25 per…
Racking Inspection Requirements in the UK Explained
BS EN 15635 recommends that steel storage racking is inspected at least every twelve months by a technically competent person, with regular in-house…
Pallet Racking vs Longspan Shelving: Which Do You Need?
Pallet racking stores palletised goods loaded by forklift, priced at £40–£90 per pallet location supplied and installed. Longspan shelving stores…
Do Mezzanine Floors Need Building Regulations Approval?
Yes, mezzanine floors usually need Building Regulations approval covering structure, fire safety and means of escape. Fire protection such as…
Get a free industrial shelving installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote