Industrial Shelving Installation

Guide · Businesses · 4 min read · Updated 17 November 2026

Pallet Racking vs Longspan Shelving: Which Do You Need?

Short answer

Pallet racking stores palletised goods loaded by forklift, priced at £40–£90 per pallet location supplied and installed. Longspan shelving stores hand-loaded cartons, parts and stock on adjustable decks, priced at £150–£350 per bay. Choose pallet racking for full pallets and high-bay storage, and longspan for picking, small items and areas without forklifts.

Pallet Racking vs Longspan Shelving: Which Do You Need?

How the two systems differ

Pallet racking uses tall upright frames and horizontal beams designed to carry pallets loaded and retrieved by forklift trucks. It is built for heavy loads, often stored high. Longspan shelving is lighter, with shorter frames and decks of chipboard, steel or mesh for goods placed by hand.

The choice depends mainly on how goods arrive and are picked. If stock arrives on pallets and moves as whole pallets, racking makes sense. If stock is picked as individual items or cartons, shelving gives better access.

Space use is another difference. Pallet racking makes good use of height, so it suits tall warehouses where floor space is expensive. Longspan shelving is usually limited to heights people can reach safely, often with steps or a picking platform for upper levels. In a low building, the difference in storage capacity between the two systems is much smaller.

FeaturePallet rackingLongspan shelving
Loaded byForklift trucksHand
Typical goodsFull palletsCartons, parts, tools, stock
Typical heightTall, often several levelsUsually reachable or with steps
Guide price£40–£90 per pallet location£150–£350 per bay
DeckingOptional mesh or pallet supportsChipboard, steel or mesh

When pallet racking is the right choice

Pallet racking suits warehouses receiving and dispatching full pallets. It uses height efficiently, storing goods several levels up. Adjustable beam levels allow different pallet heights. It can be combined with picking on lower levels, with reserve stock above.

It needs forklift trucks and suitable aisle widths. Counterbalance trucks need wider aisles than reach trucks, and very narrow aisle trucks need guided systems. Racking must be anchored, labelled with load notices and inspected regularly.

Pallet racking also comes in specialist forms. Drive-in racking stores many pallets of the same product deep in lanes, narrow aisle racking increases density with specialist trucks, and mobile racking moves on rails to open one aisle at a time. These suit particular stock profiles and are planned case by case. For most businesses, standard adjustable pallet racking gives the best balance of access, cost and flexibility.

  • Stock arrives and leaves on pallets
  • Forklift trucks are available
  • Height can be used for storage
  • Heavy loads need storing

When longspan shelving is the right choice

Longspan shelving suits picking areas, stockrooms, workshops and stores where goods are handled by hand. Shelf levels adjust easily. Wide spans allow long or bulky items. It is quicker and cheaper to install than racking for small areas.

It is not designed for forklift loading or full pallets. Loads per level are lower than racking. Tall longspan installations need safe access such as steps or platforms.

Longspan bays are also flexible. Shelf levels can be moved as stock changes, extra bays can be added to a run and decks can be swapped between chipboard, steel and mesh. Mesh decks let sprinkler water pass through and stop dust settling, which some insurers and fire risk assessors prefer. Chipboard is cheaper and gives a solid surface for small items.

For heavier parts, check the load per level carefully. Longspan levels have a stated uniformly distributed load, meaning the weight is spread evenly across the deck. Concentrated heavy items, such as a single motor or gearbox, can exceed what a deck is designed for even if the total weight looks acceptable.

  • Picking individual items or cartons
  • No forklift trucks
  • Small or mixed stock
  • Workshops and stockrooms

Combining both systems

Many warehouses use both. Pallet racking holds bulk reserve stock, while longspan shelving forms a picking area for smaller items. Some racking systems include shelf levels or decked levels for hand-picked goods at lower heights.

Planning the layout around stock flow helps. Fast-moving items go in accessible picking locations near dispatch. Slow-moving bulk stock goes higher or further away.

Some businesses use carton live storage or picking shelving at the front of racking runs, so pickers work at ground level while reserve pallets sit above. Replenishment then happens from the racking above or behind. This sort of mixed design gets the benefits of both systems in a compact footprint, but it needs careful planning of beam heights and walkways.

Think about future growth when choosing. Adding pallet racking later can be difficult if aisles have been laid out for shelving only, and vice versa. Leaving space or planning a layout that can be adapted saves cost when the business grows or the product range changes.

Costs compared

Pallet racking costs £40–£90 per pallet location supplied and installed, depending on height, loads and accessories. Longspan shelving costs £150–£350 per bay with three to five levels. Comparing cost depends on how much stock each system holds in your space.

Installation of customer-supplied racking costs £10–£25 per pallet location. We confirm one fixed price after reviewing your stock, space and handling equipment.

Installation time is usually short for both. A small longspan shelving area can often be installed in a day, while a pallet racking installation for a medium warehouse may take several days, depending on height and the number of bays. Work can usually be scheduled around deliveries so the warehouse keeps running.

Questions people also ask

Can longspan shelving hold pallets?

Longspan shelving is designed for hand-loaded goods, not forklift-loaded pallets. Pallet racking is designed for pallet loads and forklift handling. Using shelving for pallets risks overloading and damage.

Which is cheaper, racking or shelving?

It depends on what you store. Pallet racking costs £40–£90 per pallet location and longspan shelving £150–£350 per bay. Compare the cost per unit of stock stored in your space, and the handling method you use.

Do I need forklifts for pallet racking?

Yes. Pallet racking is designed for loading and retrieving pallets by forklift. Aisle widths depend on the type of truck. Without forklifts, longspan shelving is usually more practical.

Written and checked by the Industrial Shelving Installation team. Read our editorial policy.

Get a free industrial shelving installation quote

Tell us what you need and we'll come back with a clear price.

Request a quote