Guide · Businesses · 3 min read · Updated 17 November 2026
How Much Does Pallet Racking Installation Cost in the UK?
Short answer
Pallet racking supplied and installed in the UK costs £40–£90 per pallet location, and installing customer-supplied racking costs £10–£25 per location. Longspan shelving costs £150–£350 per bay, mezzanine floors £180–£350 per m², upright replacements £150–£400 each, and dismantling and re-erecting racking costs £8–£20 per pallet location.
Typical racking and shelving prices in 2026
Pallet racking is usually priced per pallet location, which is the space for one pallet on one beam level. That makes quotes easier to compare, because a run of racking with ten bays, three pallets per beam and four levels gives 120 locations whatever the frame height. Hand-loaded shelving is priced per bay, and mezzanine floors per square metre of floor area.
The guide prices below cover typical warehouse jobs on a sound concrete floor with clear access. We confirm one fixed price after reviewing your layout, pallet sizes, loads and the forklift trucks you use, so the system is designed around how your warehouse actually works.
| Job | Guide price | What it usually covers |
|---|---|---|
| Pallet racking supplied and installed | £40–£90 per pallet location | New racking, standard beams, anchoring and load notices |
| Pallet racking installation only | £10–£25 per pallet location | Erecting customer-supplied racking, anchoring and load notices |
| Longspan shelving bay supplied and installed | £150–£350 per bay | Three to five levels with chipboard decks |
| Mezzanine floor supplied and installed | £180–£350 per m² | Structure, decking, stairs and handrails |
| Racking repair (upright replacement) | £150–£400 per upright | Offloading, replacing the upright and reinstatement, parts included |
| Racking dismantling and re-erection | £8–£20 per pallet location | Taking down, labelling and re-erecting on the same site |
What affects the price per pallet location
Height is a major factor. Taller frames need heavier uprights, more bracing and access equipment such as mobile elevating work platforms to install safely. Heavier loads need stronger beams and uprights, which cost more steel. Wide beams carrying three pallets give a lower cost per location than short beams carrying one or two.
Accessories add to the price but are often essential. Pallet support bars or mesh decks stop goods falling through, upright protectors absorb forklift knocks, end-of-aisle barriers protect the frames most often hit, and anti-collapse mesh may be needed where racking backs onto walkways. Floor condition also matters, because racking must be anchored into sound concrete.
Mixed sites, where racking runs must fit around columns, doors and fire exits, also take more design time than a clear, rectangular warehouse.
- Frame height and number of beam levels
- Pallet weight and beam capacity required
- Number of pallets per beam level
- Decking, pallet supports and safety accessories
- Floor condition and anchoring requirements
- Access equipment needed for tall installations
Supplied and installed versus install only
Supplied and installed prices include new racking components designed for your loads, plus the labour to erect, anchor and label them. Install-only prices assume you have bought racking separately, perhaps second-hand or from a supplier that does not install. Install-only work costs £10–£25 per pallet location.
Second-hand racking can save money, but check it carefully. Components must be compatible, undamaged and suitable for the intended loads. Mixing parts from different manufacturers is not recommended, because beam connectors and upright profiles are designed to work together. Without the manufacturer's load data, it is hard to set safe working loads, so ask for documentation before buying.
Install-only work still needs proper design information. The installer must know the beam capacities, frame capacities for the beam levels you want, and the anchors specified by the manufacturer, so that load notices are accurate. If that data is missing, an engineer or the original manufacturer may need to assess the components before installation.
Mezzanine floor costs
Mezzanine floors cost £180–£350 per m² supplied and installed, covering the steel structure, decking, stairs and handrails. Fire protection, such as fire-rated ceilings and column casings, and building regulations approval are extra. The cost per square metre usually falls as the floor gets larger.
The intended use changes the design. Storage floors for hand-loaded goods need different loads from floors carrying pallet racking or offices. Pallet gates, extra staircases and lighting under and above the floor also add cost. Mezzanines usually need Building Regulations approval covering structure, fire safety and means of escape, so check with building control before installation.
Repairs, changes and relocations
Damaged racking should be dealt with promptly. Replacing a damaged upright costs £150–£400 per upright, including offloading the affected bays and reinstating them. Damaged beams and bracing are also replaced, and fitting upright protectors afterwards reduces repeat damage.
Changing beam levels, adding bays or moving racking to a new layout costs £8–£20 per pallet location for dismantling and re-erection on the same site. Any change to beam levels can affect the safe working load of the frames, so updated load notices should be fitted after reconfiguration.
Getting an accurate fixed price
Send a floor plan or rough sketch with dimensions, the clear height to the lowest obstruction, pallet sizes and weights, and the type of forklift trucks you use. Photos of the floor and any existing racking help. Tell us whether you need the racking supplied or only installed.
We then confirm one all-in price covering design, components where supplied, installation, anchoring and load notices. If the survey reveals something that changes the design, such as a floor that needs repair or sprinklers that limit height, we explain the options before work is booked.
Lead times matter for budgeting too. Standard racking components are often available quickly, but tall frames, unusual beam lengths and mezzanine steelwork can take several weeks to manufacture. If you are moving into a new unit, order early so racking is ready when stock arrives.
Questions people also ask
How is pallet racking priced?
Usually per pallet location, meaning the space for one pallet on one beam level. A bay with three pallets per level and four levels has twelve locations. Supplied and installed racking costs £40–£90 per location, and installation of customer-supplied racking costs £10–£25 per location.
Is second-hand pallet racking worth buying?
It can be, if components are undamaged, compatible and come with the manufacturer's load data. Mixing parts from different systems is not recommended. Have second-hand racking inspected before installation and make sure load notices reflect its actual capacity.
Do I need to anchor pallet racking to the floor?
Yes, in almost all cases. Anchoring keeps frames stable and stops them shifting when hit by forklifts or loaded. The anchors must suit the floor and the manufacturer's specification. Unanchored racking is a common finding in racking inspections.
Written and checked by the Industrial Shelving Installation team. Read our editorial policy.
More guides
Racking Inspection Requirements in the UK Explained
BS EN 15635 recommends that steel storage racking is inspected at least every twelve months by a technically competent person, with regular in-house…
Pallet Racking vs Longspan Shelving: Which Do You Need?
Pallet racking stores palletised goods loaded by forklift, priced at £40–£90 per pallet location supplied and installed. Longspan shelving stores…
Do Mezzanine Floors Need Building Regulations Approval?
Yes, mezzanine floors usually need Building Regulations approval covering structure, fire safety and means of escape. Fire protection such as…
How to Plan a Warehouse Racking Layout
Plan a warehouse racking layout by measuring the clear height and floor area, confirming pallet sizes and weights, choosing truck types to set aisle…
Get a free industrial shelving installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote