Industrial Shelving Installation

Industrial Shelving Installation

Cantilever and Specialist Racking

Cantilever racking for long items, drive-in, narrow aisle and mobile racking to suit specific storage needs.

Free Industrial Shelving Installation quote

No obligation. We only use your details to reply about this job.

Cantilever and Specialist Racking — Industrial Shelving Installation

What's involved

Some stock does not suit standard pallet racking. Cantilever racking, with arms projecting from a central column, stores long items such as timber, pipe, steel bar and sheet materials, and can be single or double sided. Drive-in racking stores large numbers of identical pallets densely, with trucks driving into the rack. Very narrow aisle racking uses guided trucks to increase storage in tall buildings, and needs a very flat floor and guidance rails or wires. Mobile racking mounts runs on powered bases that slide to open an aisle where needed. Each system has its own installation tolerances and safety requirements, so experience with the specific system matters. The installer will check the floor flatness, truck type, building height and fire protection before recommending a system. Installation times vary widely by system and size, from a day for cantilever to weeks for mobile or narrow aisle schemes.

How we handle it

  1. Site survey

    The installer measures the building, clear height, columns, doors, sprinklers and lighting, checks the floor, and discusses stock, pallet sizes, weights, picking methods and forklift trucks.

  2. Layout and load design

    You receive a layout drawing, load calculations and a quote. The design shows aisle widths, beam levels, bay sizes and protection, and is checked against your floor and trucks.

  3. Delivery and preparation

    Components are delivered and stored safely. The floor is marked out, the area cleared, and any obstacles or services relocated before installation begins.

  4. Installation

    Frames are assembled, erected, connected with beams and locking pins, plumbed, shimmed and anchored. Decks, protection and accessories are fitted, and load notices displayed.

  5. Inspection and handover

    The installation is checked for plumb, anchoring, locking pins and load notices before handover. You receive the layout and load information, and advice on inspection and safe use.

Price guide

Industrial shelving installation is priced by the job, usually based on the number of bays, pallet locations or square metres, plus the cost of the racking itself. Installation-only prices apply if you already have the equipment. Mezzanines and specialist systems are priced after design. These are typical UK guide prices for 2026.

  • Racking dismantling and re-erection: £8–£20 per pallet location. Taking down, labelling and re-erecting existing racking on the same site.
  • Racking repair (upright replacement): £150–£400 per upright. Offloading, replacing the damaged upright and reinstatement; parts included.
  • Mezzanine floor supplied and installed: £180–£350 per m². Structure, decking, stairs and handrails; fire protection and approvals extra.

Questions about cantilever and specialist racking

How much does pallet racking installation cost?

Supplying and installing new pallet racking typically costs £40 to £90 per pallet location in 2026, depending on height, load capacity and quantity. Installation only, using racking you already have, costs around £10 to £25 per pallet location. Protection, decking and floor work add to the cost.

How often should racking be inspected?

BS EN 15635 recommends racking is inspected at least every twelve months by a technically competent person, with more frequent in-house checks, often weekly, by a trained member of staff. Any damage should be reported immediately and assessed before the racking continues in use.

Does pallet racking need to be bolted to the floor?

Yes, in almost all cases. Pallet racking frames should be anchored to the floor to stop them moving if struck and to keep them stable. Manufacturers specify the type and number of anchors, which installers fit after shimming frames plumb.

Get a free industrial shelving installation quote

Tell us what you need and we'll come back with a clear price.

Request a quote