Industrial Shelving Installation

Industrial Shelving Installation

Racking Repairs and Damage Replacement

Replace damaged uprights, beams and bracing, fit protection and bring racking back into safe use after inspection.

Free Industrial Shelving Installation quote

No obligation. We only use your details to reply about this job.

Racking Repairs and Damage Replacement — Industrial Shelving Installation

What's involved

Forklift impacts are the main cause of racking damage. A damaged upright or beam reduces load capacity and can lead to collapse if left in service. Following an inspection, damage is classified by severity, and red-risk damage means the affected bay must be offloaded immediately. Repair crews offload the bay, support adjacent components, and replace the damaged upright, frame, beam or bracing with parts compatible with the original system. Mixing components from different manufacturers is generally not acceptable unless approved. Once repaired, the bay is checked and returned to use. Crews can also fit column guards, end-of-aisle barriers and rack-end protectors to reduce future damage. Most repairs take a few hours per bay, often done at quiet times. Keep a record of damage reports and repairs, and train staff to report impacts immediately rather than leaving damage unnoticed.

How we handle it

  1. Site survey

    The installer measures the building, clear height, columns, doors, sprinklers and lighting, checks the floor, and discusses stock, pallet sizes, weights, picking methods and forklift trucks.

  2. Layout and load design

    You receive a layout drawing, load calculations and a quote. The design shows aisle widths, beam levels, bay sizes and protection, and is checked against your floor and trucks.

  3. Delivery and preparation

    Components are delivered and stored safely. The floor is marked out, the area cleared, and any obstacles or services relocated before installation begins.

  4. Installation

    Frames are assembled, erected, connected with beams and locking pins, plumbed, shimmed and anchored. Decks, protection and accessories are fitted, and load notices displayed.

  5. Inspection and handover

    The installation is checked for plumb, anchoring, locking pins and load notices before handover. You receive the layout and load information, and advice on inspection and safe use.

Price guide

Industrial shelving installation is priced by the job, usually based on the number of bays, pallet locations or square metres, plus the cost of the racking itself. Installation-only prices apply if you already have the equipment. Mezzanines and specialist systems are priced after design. These are typical UK guide prices for 2026.

  • Mezzanine floor supplied and installed: £180–£350 per m². Structure, decking, stairs and handrails; fire protection and approvals extra.
  • Racking repair (upright replacement): £150–£400 per upright. Offloading, replacing the damaged upright and reinstatement; parts included.
  • Racking dismantling and re-erection: £8–£20 per pallet location. Taking down, labelling and re-erecting existing racking on the same site.

Questions about racking repairs and damage replacement

How much does pallet racking installation cost?

Supplying and installing new pallet racking typically costs £40 to £90 per pallet location in 2026, depending on height, load capacity and quantity. Installation only, using racking you already have, costs around £10 to £25 per pallet location. Protection, decking and floor work add to the cost.

How often should racking be inspected?

BS EN 15635 recommends racking is inspected at least every twelve months by a technically competent person, with more frequent in-house checks, often weekly, by a trained member of staff. Any damage should be reported immediately and assessed before the racking continues in use.

Does pallet racking need to be bolted to the floor?

Yes, in almost all cases. Pallet racking frames should be anchored to the floor to stop them moving if struck and to keep them stable. Manufacturers specify the type and number of anchors, which installers fit after shimming frames plumb.

Get a free industrial shelving installation quote

Tell us what you need and we'll come back with a clear price.

Request a quote