Industrial Shelving Installation
Pallet Racking Installation
Adjustable pallet racking erected, anchored and labelled to suit your pallets, forklift trucks and warehouse layout.

What's involved
Adjustable pallet racking is the most common storage system in UK warehouses. The installer starts with a layout based on your pallet sizes and weights, truck type and lift height, and the building's clear height, columns, doors and sprinklers. Frames are assembled from uprights and bracing, stood up and connected with beams at the specified levels, with safety locking pins fitted to every beam connector. Each frame is anchored to the floor with the correct anchors and shimmed so it stands plumb within tolerance. Back-to-back runs are joined with row spacers. Pallet support bars, mesh decks or timber panels are added where needed, and end-of-aisle protectors and upright guards fitted at vulnerable points. Load notices showing safe working loads are attached to each run. Installation speed depends on scale, but a crew can often erect several hundred pallet locations a day. Clear the floor and confirm the slab is suitable before installation.
How we handle it
Site survey
The installer measures the building, clear height, columns, doors, sprinklers and lighting, checks the floor, and discusses stock, pallet sizes, weights, picking methods and forklift trucks.
Layout and load design
You receive a layout drawing, load calculations and a quote. The design shows aisle widths, beam levels, bay sizes and protection, and is checked against your floor and trucks.
Delivery and preparation
Components are delivered and stored safely. The floor is marked out, the area cleared, and any obstacles or services relocated before installation begins.
Installation
Frames are assembled, erected, connected with beams and locking pins, plumbed, shimmed and anchored. Decks, protection and accessories are fitted, and load notices displayed.
Inspection and handover
The installation is checked for plumb, anchoring, locking pins and load notices before handover. You receive the layout and load information, and advice on inspection and safe use.
Price guide
Industrial shelving installation is priced by the job, usually based on the number of bays, pallet locations or square metres, plus the cost of the racking itself. Installation-only prices apply if you already have the equipment. Mezzanines and specialist systems are priced after design. These are typical UK guide prices for 2026.
- Longspan shelving bay supplied and installed: £150–£350 per bay. Typical bay with three to five levels and chipboard decks.
- Pallet racking installation only: £10–£25 per pallet location. Erecting customer-supplied racking, anchoring and load notices.
- Pallet racking supplied and installed: £40–£90 per pallet location. New racking with standard beams, anchoring and load notices; size and height affect price.
Questions about pallet racking installation
How much does pallet racking installation cost?
Supplying and installing new pallet racking typically costs £40 to £90 per pallet location in 2026, depending on height, load capacity and quantity. Installation only, using racking you already have, costs around £10 to £25 per pallet location. Protection, decking and floor work add to the cost.
How often should racking be inspected?
BS EN 15635 recommends racking is inspected at least every twelve months by a technically competent person, with more frequent in-house checks, often weekly, by a trained member of staff. Any damage should be reported immediately and assessed before the racking continues in use.
Does pallet racking need to be bolted to the floor?
Yes, in almost all cases. Pallet racking frames should be anchored to the floor to stop them moving if struck and to keep them stable. Manufacturers specify the type and number of anchors, which installers fit after shimming frames plumb.
Other services
Longspan and Boltless Shelving
Hand-loaded shelving for cartons, parts and stock, with adjustable shelf levels and options for chipboard, steel or mesh decks.
Mezzanine Floors
Steel mezzanine floors that add storage, office or production space, with stairs, handrails, pallet gates and building approvals.
Cantilever and Specialist Racking
Cantilever racking for long items, drive-in, narrow aisle and mobile racking to suit specific storage needs.
Racking Repairs and Damage Replacement
Replace damaged uprights, beams and bracing, fit protection and bring racking back into safe use after inspection.
Racking Dismantling, Relocation and Reconfiguration
Take down, move and re-erect racking, or change beam levels and layouts as your stock and operations change.
Pallet Racking Installation near you
Get a free industrial shelving installation quote
Tell us what you need and we'll come back with a clear price.
Request a quote